< Design & Support

Let Us Help You Design Your Lighting Scheme

Raytec’s team of expert lighting designers can help you to design a lighting scheme that ensures excellent lighting performance and efficiency during the hours of darkness and is tailored to your individual requirements. Raytec offer both 2D and 3D lighting design plans to highlight the best possible lighting positions, number of fittings and detailed lighting levels.

With over 100 years combined experience, Raytec lighting designers will work closely with you and your site plans to determine your individual requirements, and ultimately show you what the final lighting installation will look like in a variety of different practical views.

Lighting Design Services include:

Full Site Modelling

A 3D design plan is used to provide you with a visual representation of what the final installed lighting solution with actually look like, demonstrating the lux levels and spread of light that will be achieved on scene.

3D Lighting Positions

Raytec lighting is highly targeted, providing only the right amount of light needed on scene for maximum efficiency and minimum waste. Plotting the beam direction in a 3D view easily shows the precise aiming point of each panel of LEDs, the angle of elevation and exact position that the units should be set to.

Note: Directional lighting allows for a much lower lumen output!

3D Illuminance Mapping

3D lighting plans can also be provided in a pseudo colour view, providing illuminance mapping of the intensity and spread of the light output across the site. This is used to show that the area has been evenly illuminated which is crucial for achieving the highest level of safety and security.

2D Lighting Positions

A 2D lighting design is used to plot the individual light fittings onto your site plan CAD drawing, to indicate the direction and spread of the luminaires, and use contour lines to show detailed lux levels within different areas. This type of design explains exactly how Raytec will achieve the desired outcome and can be used as a guide during the installation stage.

2D Illuminance Mapping

2D lighting plans can also be provided in a pseudo colour view, to provide illuminance mapping from a bird’s eye view to easily assess the uniformity of light and output intensity at a glance across the whole site.

Example Lighting Design Reports

Factory Warehouse

Download

Oil Filling Gantry

Download

Oil Tank Storage

Download
Contact Design Team

Contact Design Team

Please enter your details and a member of the Raytec lighting design team will contact you to discuss your individual requirements.

* Indicates required field

Download Raytec Photometric Data

Raytec Photometric data can be used by other engineers and designers within lighting design software to create your own tailored lighting schemes using Raytec White-Light LED luminaires.

Request More Information

Please enter your details and a member of the Raytec team will contact you.

* Indicates required field